///
/// Copyright (c) 2015 Sensus Metering Systems
/// Author: Milan Hanajík
///
using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;

namespace TBF.BenchControl.WaterMeters.iPerl
{
	public enum MessageID
	{
		Calibration = 0x00,				/// Access to stCalibration
		Configuration = 0x01,			/// Access to stConfig
		Status = 0x02,					/// Access to stStaus, read only
		Power = 0x03,					/// Access to stPower, containing power info from both processors
		LCD = 0x04,						/// Access to stLCD
		EventData = 0x05,				/// NOT USED
		IntervalData = 0x06,			/// NOT USED
		Diagnostics = 0x07,				/// Access tostMetroDiagArray, read onl
		MetrologyMemory = 0x08,			/// Memory block access, read only
		Error_LongAck = 0x09,			/// Error message
		Command = 0x0A,					/// Command to execute, with no arguments
		Parameterizing = 0x0B,			/// Parameterizing message is used in MCI-SPI interface only
		Error_ShortAck = 0x0C,			/// Short acknowledge message is used in MCI-SPI interface only
		ChanelAlive = 0x0D,				/// Channel alive message is used in MCI-SPI interface only
		RadioPassthrough = 0x0E,		/// RFID <-> Metrology <-> Radio passthrough message
		ASICRegisterReadTest = 0x0F,	/// ASIC Register read test
		IMIDebugMessagesAccess = 0x10,	/// IMI debug messages read test
		ProductionChecksumsRead = 0x11, /// Production checksum read: Calibration (1 byte), Configuration (2 bytes), spare (4 bytes)
		HardwareParametersTest = 0x12,	/// Hardware Parameters Testing: User configurable fixed field drive time (1 byte)
		/// <summary>
		/// Notes:
		///  1.	Short Ack message contains 1-byte error code and all the fields (Offset, Payload length, payload and password) will not be present.
		///  2.	Channel Alive message does not contain the fields (Offset, Payload length, payload and password).
		///  3.	Except the above two special messages, rest all the messages in the above table will follow the message format mentioned in sections 3.1 and 3.2.
		/// </summary>
		Count							/// Number of MessageID-s
	}

	public enum MeterType : byte
	{
		DN15 = 0,
		CoaxManifold = 1,
		DN20 = 2,
		DN25 = 3,
		DN26 = 4,						/// DN25*
		DN32 = 5,
		DN40 = 6,
        AutoDetect,
		Count							/// Number of meter types
	}

	public enum VolumeUnits : byte
	{
		m3        = 0,
		UK_gallon = 1,
		US_gallon = 2,
		Count							/// Number of volume units
	}

	public enum FlowArrow : byte
	{
		No    = 0,
		Right = 1,
		Left  = 2,
		Count							/// Number of flow arrows
	}

	public enum MeterSealed : byte
	{
		InProduction = 0x00,
		OutOfProduction = 0xA5,
		Sealed = 0x5A,
	}

	public enum MeterState : byte
	{
		None      = 0,
		Idle      = 1,
		Active    = 2,
		Test      = 3,
		EndOfLife = 4,
		Count							/// Number of meter states
	}

	public enum FlowState : byte
	{
		No = 0,
		Reverse = 1,
		Forward = 2,
		EmptyPipe = 3,
		Count							/// Number of flow states
	}

	public enum OptoTelegramFlags : byte
	{
		OK = 0,
		OK_TestStart,
		OK_TestEnd,
		InvalidTelegram,	/// Wrong telegram format of checksum error
		SyncError,
	}

	public enum OptoState
	{
		Read,
		Flush,
	}
}