Cause:
- GenesisCommunication did not expose GCI preadjustment phases as selectable test activities.
- Meter size and temperature inputs required by preadjustment could not be configured.
- The configuration control incorrectly expected the iPerlCommunication configuration type.
- Preadjustment results were not propagated to TBF test and meter results.
Solution:
1. Added standalone preadjustment activities
- Added Initialization, Detect, Preparation, Amplitude Test, Temperature Calibration, Push Temperature, Offset Test and Completion.
- Each phase can be selected and executed independently.
2. Added preadjustment parameters
- Added configurable meter size and temperature.
- Added validation and supported meter-size selection.
3. Added batch preadjustment execution
- Resolves enabled Genesis register readers and their slots.
- Verifies that all readers use the same GCI Bridge instance.
- Dispatches the selected activity through the corresponding GCI Bridge API.
4. Added result processing
- Stores execution time and completion status.
- Updates test and meter results according to the GCI response.
5. Fixed the configuration control
- Corrected TestMethodCfgCtrl to accept the GenesisCommunication TestMethodCfg type.
6. Increased revision
- Updated revision to 3.9.3146.101.
A – Registration and execution
- Register GenesisCommunication Factory in the component list.
- Separate the Genesis form and sequence from iPerl communication.
B – Communication activities
- Restore initialization, connection, PCB reading, password and login.
- Include grouped login, mode switching and disconnection.
- Support processing up to 10 slots.
C1 – Input calibration factors
- Read three factors from Water meters / Text1–Text3.
- Validate integer values in the range 1–65535.
- Preserve the default of 15625 when all three fields are empty.
D – Q3 calibration
- Connect the Prepare Q3 → measurement → Write Q3 workflow.
- Add channel processing to FlyingStart and FlyingStartMassCollection.
- Reset previous measurement data and validate calculated factors.
- Mark factors as stored only after StoreCalibration succeeds.
E – Results and database
- Store calibration factors separately for each meter and channel.
- Add result entities, mappings and Q3 data.
- Extend DB.cs / EnsureSchema to create and update the schema.
- Preserve compatibility with the existing binary format.
Validation:
- Debug build and 18 tests passed.
- Simulated communication runs follow the same activity sequence.
- The complete Q3 workflow has not yet been verified on hardware.
Known limitation:
- An inherited mismatch in simulated responses and error propagation
can produce an incorrect OK result; this change does not fix it.
Cause:
- GciBridge Factory used an incorrect namespace substring offset when generating the component class name.
- The generated value was `geComponents.GciBridge` instead of `BridgeComponents.GciBridge`.
- The invalid class name could prevent correct component registration and lookup.
Solution:
1. Corrected class name generation
- Changed the namespace substring offset from 12 to 8.
- GciBridge Factory now returns the correct `BridgeComponents.GciBridge` class name.
2. Restored component identification
- GciBridge can now be registered and resolved using the expected TBF component class name.
3. Increased revision
- Updated revision to 3.9.3145.108.
Cause:
- GciBridge threw an exception when the configured UniDataStorageReader or UniDataStorageWriter was not available during component initialization.
- The exception prevented TBF from starting and made it impossible to correct the component configuration through the UI.
Solution:
1. Improved missing component handling
- Replaced fatal exceptions for missing storage components with warning logs.
- Allowed GciBridge and TBF to continue initialization.
2. Preserved existing behavior
- Available UniDataStorageReader and UniDataStorageWriter components are still linked as before.
- Existing GciBridge configurations remain compatible.
3. Increased revision
- Updated revision to 3.9.3145.107.
Cause:
- Repeating XML output always included every published meter test.
- The existing TestID/Prüfpunkt configuration was not used to filter generated XML test records.
- A configured TestID could be evaluated in an incorrect repeating test context.
Solution:
1. Added optional test filtering
- Non-empty TestID values define the tests included in repeating XML output.
- Multiple configured TestID values act as a whitelist.
2. Preserved existing behavior
- When no TestID is configured, all published tests are exported as before.
- Existing configurations remain compatible without migration.
3. Prevented cross-test evaluation
- Test-dependent items are evaluated only for their matching TestID.
- Values from one test are no longer reused in another test record.
4. Improved source formatting
- Reformatted ResultsWriter.cs for easier reading and searching.
5. Increased revision
- Updated revision to 3.9.3145.106.
Cause:
- Previous results opens the ResultsWriter configuration through GetControl(null).
- The component entity list is therefore unavailable.
- The DropDownList could not display the saved ParentName because it was not present in its Items collection.
Solution:
1. Restored the saved parent writer
- Adds the configured ParentName to the list when it is not already available.
- Selects the restored UniDataStorageWriter in parentComboBox.
2. Preserved standard configuration behavior
- All available UDSW components are still loaded when component entities are provided.
- Previous results can now display and use the previously configured parent writer.
3. Improved source formatting
- Removed inappropriate line wrapping from ResultsWriterCfgCtrl.cs.
4. Increased revision
- Updated revision to 3.9.3145.105.
Cause:
- ResultsWriter explicitly suppressed the existing TestID column.
- Users could not configure the test identifier for test-dependent result variables.
- In the German localization, the corresponding Prüfpunkt column was therefore hidden.
Solution:
1. Enabled TestID configuration
- Set SupressTestIDColumn to false.
- The TestID/Prüfpunkt column is now displayed after Merge.
2. Preserved existing configuration handling
- TestID values continue to use the existing WMeterRsltItemSpec serialization.
- No configuration format change was required.
3. Increased revision
- Updated revision to 3.9.3145.104.
Cause:
- Payload archive filenames required values from the generated XML payload.
- Date/time values needed filename-safe formatting.
- XML result values such as Passed and Failed needed configurable conversion to P and F.
Solution:
1. Added XML filename tokens
- Supports any unique non-repeating XML value using {Xml:/path}.
- Resolves filename values directly from the generated payload.
2. Added user-friendly token configuration
- Clicking inside a token opens the XML value chooser.
- Added Time format and Mask transformations.
3. Improved filename generation
- Validates XML paths and rejects ambiguous repeating values.
- Sanitizes resolved values for safe filesystem usage.
- Passes the per-meter payload context from ResultsWriter.
4. Integrated the new dialog
- Added PayloadFileNameXmlTokenDlg and its Designer file.
- Updated the TBF project configuration.
5. Increased revision
- Updated revision to 3.9.3145.103.
Cause:
- The customer XML format requires batch, DUT, group and test-level metadata.
- ResultsWriter did not provide variables for test position, repetition index, batch duration, DUT test duration or aggregated test statuses.
- Missing WaterMeterData could cause a NullReferenceException while evaluating WM Type.
Solution:
1. Added XML mapping variables
- Added TestPositionInBatch and TestRepetitionNr.
- Added BatchTime and TestsTotalTime.
- Added PassedFromAllTests and PassedFromRepeatedTests.
2. Added hierarchical result evaluation
- Evaluates the overall PANEL/DUT status from all tests.
- Evaluates GROUP status from repeated instances of the selected test.
3. Improved meter data handling
- Made WM Type evaluation null-safe when WaterMeterData is unavailable.
4. Increased revision
- Updated revision to 3.9.3145.102.
Cause:
- ResultsWriter evaluated selected test-dependent items without the actual TestID.
- This caused values such as Test passed(), timestamps, flow, pressure, temperature, conductivity and error data to be empty or incorrect.
Solution:
1. Fixed test-aware result evaluation
- Uses published regular meter test results.
- Passes mtr.Name() as TestID to item.Print(wm, testId).
2. Restored correct test result mapping
- Test-dependent values are now resolved from the correct TestRslt / MeterTestRslt.
3. Increased revision
- Updated revision to 3.9.3145.101.
Cause:
- ResultsWriter required a generic way to generate customer-specific XML result data from TBF measurement results.
- The customer reference XML contains example runtime values and repeated result structures, so it cannot be used directly as the generated output.
- TBF result variables must be explicitly mapped to destinations in the customer XML structure.
- The generated XML result data must support two output targets:
- direct creation of an XML file,
- delivery of the XML payload to a Microsoft SQL stored procedure.
- Preview generation must allow the XML structure and configured mappings to be verified without executing the production database write.
- Increase revision to 3.9.3145.100.
Solution:
1. Added XML reference analysis
- Creates a clean base XML structure.
- Extracts the repeating result prototype.
- Prevents sample runtime values from the customer reference XML from leaking into generated results.
2. Added configurable TBF-to-XML result mapping
- Allows explicit mapping of TBF result variables to customer XML destinations.
- Supports one-time and repeating XML destinations.
- Keeps the mapping independent of the semantic meaning of customer XML attribute names.
3. Added XML destination viewer and configurator
- Shows the current mapping.
- Highlights repeating destinations.
- Identifies already used one-time destinations.
4. Added runtime XML result generation
- Uses the configured TBF-to-XML mappings.
- Uses measurement procedure result data.
- Builds the output from the clean base XML and repeating XML prototype.
- Generates repeated result records according to the executed measurement procedure.
5. Added simulation-based Preview request
- Generates a complete XML payload using simulation values.
- Allows XML structure and mapping verification before production execution.
- Does not execute the production stored procedure.
6. Added direct XML file output support to UniDataStorageWriter
- Supports File / .xml as a physical output target.
- Creates the generated XML result file in the configured output directory.
7. Added Microsoft SQL stored-procedure XML output
- Supports Microsoft SQL / StoredProcedure as a physical output target.
- Passes the generated XML payload through the configured stored procedure parameter.
8. Added optional XML payload archiving
- Allows generated XML payloads to be stored in the configured Payload archive.
- Can be used together with the Microsoft SQL stored-procedure output.
9. Kept ResultsWriter independent of the physical output target
- ResultsWriter generates the result payload.
- UniDataStorageWriter decides how and where the payload is physically written.
- The same ResultsWriter XML generation mechanism is therefore used for both XML file and MSSQL outputs.
10. Increased revision
- Updated revision to 3.9.3145.100.
Cause:
1. Background: Restore/ensure testInProgress behavior before the DataEntry sequence and explicitly prevent to reset the pulse.
2. Increase revision to 3.9.3145
Solution:
1. Deleted .AddOperation(testInProgress) calling
2. Increased revision to 3.9.3145
Cause:
1. When the Cycle was stopped during the second or a later test and then resumed using the Start Test button, the resume confirmation was handled incorrectly. After selecting to continue, the sequence restarted from the first test instead of continuing from the interrupted test.
2. Increase revision to 3.9.3134.114
Solution:
1. Corrected the Cycle resume logic so that, after confirming continuation, the sequence resumes from the interrupted test instead of restarting from the first test.
2. Increased revision to 3.9.3134.114
Cause:
1. Background: there was a suspicion that the Bukoven board left RefPulses active across operations; this was investigated and ruled out. The pulse counter is reset by testInProgress when an operation is reused. During the third DataEntry window testInProgress had been temporarily disabled (SLM vs Karlsruhe difference), which allowed RefPulses to appear to persist.
2. Increase revision to 3.9.3134.113
Solution:
1. Restore/ensure testInProgress behavior during the DataEntry sequence and explicitly reset the pulse counter when starting a new operation.
2. Increased revision to 3.9.3134.113
Refactor Flip Mode parameter type in `WMeterRsltItemSpec` to `Quantity.String` for consistency. Add `SetTestModeOpto7Str` alias to improve readability and replace legacy A0 test mode reference in `iPerlCommunicationParams`.
Introduce configurable timeouts for data entry volume reads in `IRegReaderSmart` and its implementations: added optional timeout parameters and updated default values across associated forms and methods. Updated `EntryFormCfg` to support customizable timeout settings.
Add robust handling for form closure in UNI Data Entry: prevent operations on disposed/closing forms, enhance logging, and update logic in serial number and volume updates. Increment version to 3.9.3141.0.
Implement smart meter interface enhancements for AllyReader: Add `ISmartMeterReader` interface, update `RegisterReaderSelection` logic, integrate smart-meter position selection, and expand unit test coverage.
Add debug logging and UI enhancements for data entry processes: Improve register reader handling in sequences and forms, add detailed data entry debug logs, integrate serial number and volume watermarking, and update localized strings in multiple languages.
Add Flip Mode support across iPerl-related test methods and database schema: implement FlipMode property, update MeterTestRslt mappings, integrate schema migration logic, and refine test result handling.
Enhance iPerl dialog layout and error handling: improve `ShuffleTextBoxes` with positional mapping, refine checkbox state tracking, add detailed logging for labels and checkboxes, and handle serial port exceptions. Increment version to 3.9.3139.0.
Add support for Flip Mode configuration in iPerl: Implement `SetFlipMode` functionality in `OptoHeadTest` and `RadioService`, integrate constants, enhance UI, and add unit and integration tests for constant/randomized flip mode settings.
Add AllyReader and AllyCalibration support with tests: Introduce new register readers, calibration methods, and comprehensive unit tests for integration and functionality validation. Update project files accordingly.
Add support for reading and handling additional common parameters in OptoHeadTest. Extend RadioService and related classes with enhanced parsing and validation logic. Update UI and constants for functionality integration.
Add support for reading additional common parameters in OptoHeadTest. Enhance `RadioService` and `VersionTypeResult` with new parsing logic. Update related constants and UI elements for functionality integration.
Cause:
1. Background: there was a suspicion that the Bukoven board left RefPulses active across operations; this was investigated and ruled out. The pulse counter is reset by testInProgress when an operation is reused. During the third DataEntry window testInProgress had been temporarily disabled (SLM vs Karlsruhe difference), which allowed RefPulses to appear to persist.
2. Increase revision to 3.9.3134.112
Solution:
1. Restore/ensure testInProgress behavior during the DataEntry sequence and explicitly reset the pulse counter when starting a new operation.
2. Increased revision to 3.9.3134.112
Improve `VersionTypeResult` parsing and handling: Add compact/legacy payload support. Extend `ReadingUnits`. Update `IperlHatIntegrationTests` and `RadioService` with new tests and functionality integration.
Add protocolCommons classes and enhance RadioService with support for CalibrationFactor, VersionType, ReadingUnits, and FlipMode operations. Add corresponding unit tests for validation. Update project files.
Cause:
1. Missing functionality to display remaining time during tests in `StandingStartMassCollectionSeq.cs` and `StandingStartMassCollectionAdvanceSeq.cs`.
2. Assembly version and file version required an update to reflect changes.
Solution:
1. Implemented remaining time display in `StandingStartMassCollectionSeq.cs` and `StandingStartMassCollectionAdvanceSeq.cs` using `Bridge.OnActivity` to show time in minutes and seconds or seconds only.
2. Updated assembly version and file version in `AssemblyInfo.cs` to `3.9.3134.110`.
Cause:
1. Updated `unit` constant in `TestStartEndForm` class within `TBF.Rig.DataEntry.StandardCamera` namespace from `Unit.m3` to `Unit.l`.
2. Updated `unit` constant in `TestStartEndForm` class within `TBF.Rig.DataEntry.StandartCameraPurchaseOrder` namespace from `Unit.m3` to `Unit.l`.
3. Incremented assembly version and file version in `AssemblyInfo.cs` to `3.9.3134.109`.
Solution:
1. Changed `unit` constant in `TestStartEndForm` class within `TBF.Rig.DataEntry.StandardCamera` namespace to `Unit.l`.
2. Changed `unit` constant in `TestStartEndForm` class within `TBF.Rig.DataEntry.StandartCameraPurchaseOrder` namespace to `Unit.l`.
3. Updated assembly version and file version in `AssemblyInfo.cs` to `3.9.3134.109`.
marekf
michal